PRM JETSTREAM INTAKE SYSTEM
'90-'95 ESCORT GT kit installed in '94 RS

(Information posted to MX-3 Mailing List by Sean A. from Tampa, FL)

Date: July 20, 1998
Subject: Re: [mazdamx-3owners] Intake Systems
From: Xxincision@aol.com


I just put the Escort GT PRM intake on my 1994 MX3 RS. Whoooo boy!!! Talk about an improvement. Way better than
the HKS I had. It makes an awesome growl too under full throttle. Way more torque. Right now I have the aluminum down
pipe in the fender well but the filter itself may fit down there so I am going to try that out and see if it yields any more hp. Well
worth the $189 (US).

Sean

Date: July21,1998
Subject: Re: [mazdamx-3owners] PRM Filters
From: Xxincision@aol.com

I have a 1994 DOHC. It came with an extra adapter I didn't need. Install was a breeze, 1/2 hour max (took me that long
because it didn't come with instructions). Take off the airbox (about 4 bolts). Remove the resonator from the fender
well. Position the aluminum adapter in the fender well. I had to use some plastic fasteners as a make shift means of keeping the
filter from rattling around. I am going to custom make a metal fastener soon.

Sean

Date: July23, 1998
Subject: PRM Filter for the RS
From: Xxincision@aol.com

Here is the picture of the PRM filter on my 1994 MX3 RS 1.6L DOHC. I am going to relocate the battery to the trunk so I
can route a custom 3 inch aluminum intake closer to the edge of the engine bay to aviod some heat. The plastic fasteners will
give way to a more permanent means of securing the filter when I get back from vacation. This thing is great. Get one!

Sean